Enerlites Power Pack
Bulk Savings
automatically applied on carts over $500 - Learn more
Bulk Savings
automatically applied on orders over $500 - Learn more
Volume Discounts automatically applied for orders $500+
Free Shipping on orders $100+
Ships within 1 business dayOverview
The ENERLITES MPP-24 power pack is the foundation for any low voltage lighting control system. It supplies low voltage power to occupancy sensors and other control devices, switching line voltage in response to signals from control devices. The power pack is attached to existing junction boxes or mounted into fixture wiring trays. Low voltage wiring should use at least 22-gauge wire. High voltage connections should use at least 14-gauge. After initial wiring is completed, check the wiring diagrams to verify the power pack is wired correctly. Improper wiring can cause damage to the power pack, lighting system, occupancy sensor and other control devices. This power pack can supply power for up to 6 ceiling mounted sensors.
Features
-
- Ballast: 20amp @120/230/240/277VAC, 50/60Hz
- Tungsten: 15amp @120VAC, 50/60Hz
- 5amp @250VAC, 50/60Hz
- Motor: 1HP @120/240VAC, 50/60Hz
- Output: 150mA @24VDC (with relay connected)
- Model Number: MPP-24
The ENERLITES MPP-24 power pack is the foundation for any low voltage lighting control system. It supplies low voltage power to occupancy sensors and other control devices, switching line voltage in response to signals from control devices. The power pack is attached to existing junction boxes or mounted into fixture wiring trays. Low voltage wiring should use at least 22-gauge wire. High voltage connections should use at least 14-gauge. After initial wiring is completed, check the wiring diagrams to verify the power pack is wired correctly. Improper wiring can cause damage to the power pack, lighting system, occupancy sensor and other control devices. This power pack can supply power for up to 6 ceiling mounted sensors.
Features
-
- Ballast: 20amp @120/230/240/277VAC, 50/60Hz
- Tungsten: 15amp @120VAC, 50/60Hz
- 5amp @250VAC, 50/60Hz
- Motor: 1HP @120/240VAC, 50/60Hz
- Output: 150mA @24VDC (with relay connected)
- Model Number: MPP-24
Overview
The ENERLITES MPP-24 power pack is the foundation for any low voltage lighting control system. It supplies low voltage power to occupancy sensors and other control devices, switching line voltage in response to signals from control devices. The power pack is attached to existing junction boxes or mounted into fixture wiring trays. Low voltage wiring should use at least 22-gauge wire. High voltage connections should use at least 14-gauge. After initial wiring is completed, check the wiring diagrams to verify the power pack is wired correctly. Improper wiring can cause damage to the power pack, lighting system, occupancy sensor and other control devices. This power pack can supply power for up to 6 ceiling mounted sensors.
Features
-
- Ballast: 20amp @120/230/240/277VAC, 50/60Hz
- Tungsten: 15amp @120VAC, 50/60Hz
- 5amp @250VAC, 50/60Hz
- Motor: 1HP @120/240VAC, 50/60Hz
- Output: 150mA @24VDC (with relay connected)
- Model Number: MPP-24
Downloads
Maximize Your Savings
| SPEND | SAVE |
|---|---|
| $500 - $999 | 5% |
| $1,000 - $1,999 | 11% |
| $2,000 - $2,999 | 12% |
| $3,000 - $3,999 | 13% |
| $4,000 - $4,999 | 14% |
| $5,000 - $5,999 | 15% |
| $6,000 - $6,999 | 16% |
| SPEND | SAVE |
|---|---|
| $7,000 - $7,999 | 17% |
| $8,000 - $8,999 | 18% |
| $9,000 - $9,999 | 19% |
| $10,000 - $19,999 | 20% |
| $20,000 - $49,999 | 25% |
| Over $50,000 | 30% |
