- Warranty: 3-Year Manufacturer's Warranty
This plug-in PIR (infrared) motion sensor twists into the 3-pin Q-Base sensor receptacle on compatible LED fixtures and is powered by the fixture. It brings the light to full output when it detects motion, holds it there for the set hold time, then dims it to a stand-by level. Set it with the two dials on the sensor or with the remote control, sold separately.
Features
-
- 3-pin plug-in sensor for the Q-Base sensor receptacle; no wiring
- Mounting height up to 39.4 ft (12 m), or up to 49.2 ft (15 m) with the 49 ft model
- Detection radius 14.7 ft to 22.9 ft (4.5 m to 7 m)
- Hold time on the dial: 5 seconds, 1, 5 or 10 minutes; 5 seconds to 30 minutes with the remote
- Stand-by dimming level on the dial: 0%, 10%, 30% or 50%; 10% to 50% with the remote
- Detection area, daylight sensor level and stand-by period set with the remote control, sold separately
- 0-10V dimming control
- IP65, UL listed
- Works from -4°F to 140°F; for freezers and colder spaces, use the microwave sensor
- 3-year limited warranty; 5-year for the 49 ft model
- Dimensions: 2-1/8" x 2-1/8" x 1-11/16"
Compatible Fixtures
| ASD-WFS-ST-160 |
| ASD-WFS-ST-240 |
| ASD-UFSHV-PRO-200-QB |
| ASD-UFSHV-PRO-300-QB |